Главная    Почта    Новости    Каталог    Одноклассники    Погода    Работа    Игры     Рефераты     Карты
  
по Казнету new!
по каталогу
в рефератах

Источники бесперебойного питания

иpовать" включение машин c ATX motherboard'ами, если они
умеют выполнять "Power Up at Ring on COMx". Воспользуется ли этой
озможностью APC на пpактике - поживем, увидим...

 

    3.1.4 APC Smart UPS DB9 interface connector pinout
                                    [pic]
    3.2  SENDON (NTT)

    3.2.1 SENDON UPS-500 Dumb Cable
Cable Part# - M2501   ,  Software - RUPS for DOS/Windows
                                    [pic]
    3.3  Tripp-Lite

    3.3.1 OmniPro-450 (675) interface pinout  
|Pi|Signal type                                  |
|n |                                             |
|# |                                             |
|1 |Common (negative)                            |
|2 |External inverter shutdown (positive side)   |
|3 |Line fail (norm. open)                       |
|4 |External inverter shutdown (negative side)   |
|5 |Line fail (norm. closed)                     |
|6 |Low battery (norm. open)                     |


    3.3.2  OmniPro-450 (675) PowerAlert Cable
Tripp-Lite Part# 73-0724 (BC, Internet Office, OmniSmart UPS)
                                    [pic]
    3.3.3  OmniPro-450 (675) WinNT Cable

Software: Windows NT "UPS Service"
                                    [pic]
"UPS Service" с этим кабелем следует cконфигурировать так:

Power_Failure - Negative, Low_Battery - Negative, UPS_Shutdown - Positive.
    3.3.4 Tripp-Lite SmartPro Cable
Tripp-Lite Part# 73-0743 (SmartPro UPS)   ,  Software: PowerAlert
                                    [pic]
    3.4  Neuhaus Distribution Group

    3.4.1 Neuhaus SmartLine-420, SmartLine-750 (Fenton PowerPal)
Software: RUPS-II   ,  Cable Part# M2502
                                    [pic]
    3.4.2  Neuhaus SmartLine/Fenton PowerPal interface pinout:

|Pi|Signal Type                                |
|n |                                           |
|# |                                           |
|1 |N/A                                        |
|2 |AC Failure (Contact Closure)               |
|3 |N/A                                        |
|4 |Common                                     |
|5 |Battery Low (Contact Closure)              |
|6 |Rx (RS232) and Turn Off UPS (Contact       |
|  |Closure)                                   |
|7 |Common                                     |
|8 |N/A                                        |
|9 |Tx (RS232)                                 |


The contact closure signals are relay signals and are "normal open".

The RS232 signals are photo-transistor signals.

   

          3.5  Para Systems Inc.
    3.5.1 MinuteMan A-series DB-9 Interface Port
|P|Signal Type                                 |
|i|                                            |
|n|                                            |
|#|                                            |
|1|Unused                                      |
|2|AC Failure                                  |
|3|Unused                                      |
|4|Common (same as 7)                          |
|5|Low Battery                                 |
|6|RS-232 level shutdown                       |
|7|Common (same as 4)                          |
|8|Ground level shutdown (not available on     |
| |models smaller than A500)                   |
|9|Reserved                                    |


Pins 2 and 5 are connected to Common when they are true.

On pin 6, an rs-232 high level (>9V) will shutdown, when running on
battery.

On pin 8, shorting to ground will shutdown.

 

          3.6  PowerCom
    3.6.1 PowerCom King UPS cable    Software - UPSMon-II
                                    [pic]
AC_Fail and Bat_Low - normally open (shorted to GND when active).

 

          3.7  Exide/Deltec/Fiskars
    3.7.1 Fiskars PowerRite Max / PowerRite Pro Cable
                                    [pic]
    3.7.2  Fiskars PowerRite UPS Port Configuration Table
|Pin #|Signal Type               |Function                   |
|1    |Basic Modem Mode;         |Remote UPS off: In presence|
|     |Input: RS232 high pulse 4 |of  AC, Output will turn   |
|     |to 5 seconds wide         |off for 15 seconds after   |
|     |                          |conditionaldelay. In       |
|     |                          |absence of AC, output is   |
|     |                          |kept off until normal AC   |
|     |                          |returns                    |
|1    |Serial Data Mode;         |RS232 serial communication |
|     |Input: RS232 data         |input. 1200 baud, 8-bit, no|
|     |                          |parity, one stop bit, one  |
|     |                          |start bit, Xon/Xoff        |
|2    |Basic Mode;               |AC Input failure           |
|     |Output: RS232 level high  |                           |
|2    |Serial Data Mode;         |RS232 serial communication |
|     |Output: RS232 data        |output. Same as input      |
|3    |Output: Open collector    |AC Input failure           |
|     |transistor ON, 50 mA. 40  |                           |
|     |VDC rating                |                           |
|4    |Signal Common             |Signal Common              |
|5    |Output: Open collector    |Impending low battery      |
|     |transistor ON. SO mA. 40  |                           |
|     |VDC rating                |                           |
|6    |Input: RS232 level low    |Plug and Play software     |
|     |(-12V)                    |enable trigger             |
|7    |Input: Relay contact or   |Remote output OFF/ON: UPS  |
|     |RS232 level               |total output can be kept   |
|     |                          |off with low signal or     |
|     |                          |closing relay contact      |
|8    |Output: 8 to 25 VDC, 5 W  |Auxiliary Control Power    |
|     |constant power (0.63 A    |                           |
|     |max. @ 8V)                |                           |
|9    |Chassis                   |Connection to chassis      |


    3.8  Hewlett-Packard PowerWise
    3.8.1  HP PowerWise L600/L900/L1250 interface pinout
|Pin|Signal    |Function                                     |
|#  |Type      |                                             |
|1  |RS-232    |Signal Common for all RS-232 port signals    |
|   |Earth     |(earth ground referenced)                    |
|   |Ground    |                                             |
|2  |RS-232    |Serial communication mode - output signal    |
|   |Transmit  |line.                                        |
|   |Output    |                                             |
|3  |RS-232    |Serial communication mode - input signal     |
|   |Receive   |line. Contact Closure mode - shuts down UPS  |
|   |Input /   |if signal is held high (RS-232 level) for 200|
|   |Shutdown  |milliseconds while UPS is operating in       |
|   |          |battery mode.                                |
|4  |AC Line   |Contact Closure mode - opened when AC line   |
|   |Fail      |fails and UPS is operating in battery mode   |
|   |(normally |(breaks connection between Pin#4 and Pin#5). |
|   |closed)   |                                             |
|5  |Contact   |Signal Common for all Contact Closure group /|
|   |Closure   |RS-232 Signal Common line.                   |
|   |Common /  |                                             |
|   |RS-232    |                                             |
|   |Common    |                                             |
|7  |Low       |Contact Closure mode - closed when remaining |
|   |Battery   |"on-battery runtime" drops below the         |
|   |(normally |under-defined time limit (makes connection   |
|   |open)     |between Pin#7 and Pin#5).                    |
|9  |AC Line   |Contact Closure mode - closed when in battery|
|   |Fail      |mode (makes connection between Pin#9 and     |
|   |(normally |Pin#5).                                      |
|   |open)     |                                             |



    3.8.2  HP PowerWise L600/L900/L1250 cable
Hewlett-Packard Part# - 201-471-09    , Software - HP PowerWise Assistant
                                    [pic]
          3.9  Optiquest/Viewsonic
    3.9.1  OptiUPS-650E/420E Cable
Optiquest Part# 730-02024-00    , Software - OPTI-SAFE+
                                    [pic]
    3.10  Liebert

    3.10.1  UPStation-GXT interface pinout  
|Pin|Function                                 |
|#  |                                         |
|1  |Low Battery (Optocoupler Collector: +V)  |
|2  |UPS TxD                                  |
|3  |UPS RxD                                  |
|4  |Remote ShutDown (+5..12VDC, 10 mA max);  |
|   |on battery operation                     |
|5  |Common                                   |
|6  |Remote ShutDown (Short to pin 5); any    |
|   |mode operation                           |
|7  |Low Batery (Optocoupler Emitter: -V)     |
|8  |Utility/Mains Fail (Optocoupler Emitter: |
|   |-V)                                      |
|9  |Utility/Mains Fail (Optocoupler          |
|   |Collector: +V)                           |


Maximum voltage and current on pins 1,7,8,9 shall be 80 VDC, 10.0 mA max

 

     3.10.2  UPStation-GXT dumb cable
 Software - SiteNet Multilink.
        [pic]
    3.11 Invertomatic-Victron (IMV)

    3.11.1  Victron UPS "intelligent" (serial communication) cable
Victron Part#  VIC-23/2   ,  Software - PowerFLAG
        [pic]
           3.11.2  Victron UPS to modem serial connection cable
Victron Part#  VIC-32
        [pic]

         
    3.11.3  Victron contact closure (dumb) cable
Victron Part#  VIC-25 (VIC-28)   ,  Software - PowerFLAG
        [pic]
Кабель VIC-28 отличается от VIC-25 только отсутствием сигнала "Shutdown".
Этот кабель также мож
12345
скачать работу

Источники бесперебойного питания

 

Отправка СМС бесплатно

На правах рекламы


ZERO.kz
 
Модератор сайта RESURS.KZ